REVERSED PHASE HPLC COLUMNS

PRP -1 Reversed Phase HPLC Column

Polymeric 100 Å columns for reversed phase, LC/MS Applications.

• pH stable from 1 to 13
  • Low bleed (ideal for mass spectrometry)
  • Robust (virtuallyany HPLC solvent can be used)
  • One particle size: 5 µm.
  • Four column diameters: 2.1, 4.6, 10 and 100 mm.
  • Analytical and semiprep/preparative guard columns

PRP-h5 Reversed Phase HPLC Column

Polymeric 300 Å columns for Oligonucleotide Purification & Protein Separations

• pH stable from 1 to 13
• Robust (virtually any HPLC solvent can be used)
• Hydrophilic polymer structure delivers faster oligonucleotide purification
• One particle size: 5µm.
• Three column diameters: 2.1, 4.6 and 10mm.
• Analytical and semiprep/preparative guard columns

PRP-1 Reversed Phase HPLC Column

Polymeric 100 Å columns for general reversed phase separations

• pH stable from 1 to 13
• Better sample recovery than silica-based columns there are no silanol groups)
• Excellent durability
(stable to any concentration of water or organic solvent)
• Five particle sizes: 5, 7, 10, 12-20 and 30-50 µm.
• Eleven column internal diameters: 1.0 to 101.6 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical and semiprep/preparative guard columns

PRP-Infinity Reversed Phase HPLC Column

Polymeric non-porous packing for fast gradient separation of large proteins

• pH stable from 1 to 13
• Better sample recovery than silica-based columns (there are no silanol groups)
• Excellent durability (the support can be cleaned with strong acid or base to remove any sample residue)
• One particle size: 4 µm.
• Three column internal diameters: 2.1 to 10.0 mm.
• One column material: 316 stainless steel.

PRP-3 Reversed Phase HPLC Column

Polymeric 300 Å columns for Protein Separations

• pH stable from 1 to 13
• Better sample recovery than silica-based columns (there are no silanol groups)
• Excellent durability (the support can be cleaned with strong acid or base to remove any sample residue)
• Two particle sizes: 10 and 12-20 µm.
• Eight column internal diameters: 1.0 to 50.8 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical and semiprep/preparative guard columns.

PRP-C18 Reversed Phase HPLC Columns

High Efficiency at any pH

The Hamilton PRP-C18 is a new HPLC column designed to provide high-efficiency, reversed-phase separations over an extended
column life in nearly any mobile phase or pH. The rigid stationary phase has excellent mechanical and thermal stability (> 100°C),
does not shrink or swell, and is completely inert to most conditions commonly encountered in reversed-phase chromatography.

• Excellent mechanical and thermal stability (> 100°C)
• Can be regenerated in high acidic or basic concentrations (1 M)
• High-efficiency reversed-phase separations in nearly any mobile phase or pH
• Performs extreme applications not possible with traditional ODS C18

ANION EXCHANGE HPLC COLUMNS

PRP-X100 Anion Exchange HPLC Columns

Polymeric anion exchange packings for separation of inorganic and organic anions.

• pH stable from 1 to 13
• Easily separates the eight common anions (flouride through sulfate)
• Good separation of fluoride from the water dip
• Use with organic solvent from 0 to 100% for elution of hydrophobic anions or column cleaning
• Use Conductivity or UV detection
• Three particle sizes: 5, 10 and 12-20 µm.
• Eight column internal diameters: 1.0 to 50.8 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical and semiprep/preparative guard columns.

PRP-X110 & PRP-X110S Anion Exchange HPLC Columns

Polymeric anion exchange packings for separation of inorganic and organic anions from 20 ppb to 20 ppm

• pH stable from 1 to 13
• Good separation of fluoride from the water dip
• Use with organic solvent up to 100%
• Compatible with Conductivity or UV detectors
• One particle size: 7 µm.
• Four column internal diameters: 1.0 to 4.6 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical guard columns.

RCX-10 Anion Exchange HPLC Columns

Polymeric anion exchange packing for isocratic or gradient separation of carbohydrates.

pH stable from 1 to 13
• Isocratic separation of mono & disaccharides
• Gradient separation of oligomers up to Dp8
• Compatible with PAD, conductivity & RI detectors
• One particle size: 7 µm.
• Three column internal diameters: 2.1 to 4.6 mm.
• Two column materials: 316 stainless steel and PEEK.
• Guard columns in stainless steel and PEEK.

RCX-30 Anion Exchange HPLC Columns

Polymeric anion exchange packing for isocratic or gradient separation of complex carbohydrates
• pH stable from 1 to 13
• Isocratic or gradient modes
• Higher ion exchange capacity support for separation of closely related carbohydrates
• Compatible with PAD & RI detectors
• One particle size: 7 µm.
• Three column internal diameters: 2.1, 4.1 and 4.6 mm.
• Two column materials: Stainless steel and PEEK.
• Guard column in PEEK.

PRP-X500 Anion Exchange HPLC Column

Polymeric strong-base anion exchange packing with limited porosity for separation of proteins

• Fast separation of large proteins
• pH stable from 1 to 13
• One particle size: 7 µm.
• Three column internal diameters: 2.1 to 10.0 mm.
• Two column materials: 316 stainless steel and PEEK.
• Higher sample capacity than nonporous Supports

PRP-X600 Anion Exchange HPLC Columns

Polymeric weak-base anion exchange packing for gradient separation of proteins and DNA oligomers

• Limited porosity allows separation of large DNA fragments
• pH stable from 1 to 13
• One particle size: 7 µm.
• Column material: PEEK.
• Higher sample capacity than nonporous supports.
• Guard column in PEEK.

ION EXCLUSION HPLC COLUMNS

PRP-X300 Ion Exclusion HPLC Columns

Polymeric ion exclusion packing for separation of alcohols and organic acids

• Separate structurally similar alcohols
• Separate similar organic acids
• Use with organic solvent from 0 to 100% for elution
of highly retained compounds
• One particle size: 7 µm.
• Five column internal diameters: 1.0 to 10.0 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical and semiprep/preparative guard columns.

CATION EXCHANGE HPLC COLUMNS

PRP-X200 Cation Exchange HPLC Columns

Polymeric cation exchange packing for separation of inorganic & organic cations

• pH stable from 1 to 13
• Easily separate mono or divalent cations
• Use with organic solvent upto 100% for elution of
hydrophobic cations or column cleaning
• Compatible with condictivity & UV detectors
• One particle size: 10 µm.
• Six column internal diameters: 1.0 to 10.0 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical and semiprep/preparative guard columns

PRP-X400 Cation Exchange HPLC Columns

Polymeric cation exchange packing for separation of glyphosate and its metabolite in drinking water

• Detection levels of less than 10 ppb when using the post column, OPA derivatization technique
• Applicable to other separations, such as inositol and sugar alcohols
• Faster Analysis
• Two particle sizes: 7 and 12-20 µm.
• Five column internal diameters: 2.1 to 21.5 mm.
• Two column materials: 316 stainless steel and PEEK.
• Analytical and semiprep/preparative guard columns.

PRP-X800 Cation Exchange HPLC Columns

Polymeric cation exchange columns for isocratic separation of mono & divalent cations

•  Isocratic separation of lithium, sodium, ammonium, potassium, magnesium & calcium
• Gradient separation of transition metals
• Excellent durability (stable to any concentration of water or organic solvent)
• One particle size: 7 µm.
• Two column internal diameters: 4.1 to 4.6 mm.
• Two column materials: 316 stainless steel and PEEK.
• Guard columns in 316 stainless steel and PEEK.

HC-40 Gel-type Cation Exchange HPLC Columns

Polymeric 4% cross-linked soft-gel column for cation, ligand exchange separation of carbohydrates

• Separate oligosaccharides up to DP8
• Water mobile phase
• Compatible with RI detectors
• One particle size: 10 – 15 µm.
• One column internal diameter: 7.8 mm.
• One column material: 316 stainless steel.

Your content goes here. Edit or remove this text inline

Office Info